VIETNAM · MEDICAL DEVICES

Changing the Registration Holder in Vietnam: Re-Filing Routes and Supply Transition

Changing the registration holder for a medical device in Vietnam cannot be treated simply as replacing the company name on the existing registration. For a project moving from one local company to another, the handover should be built on the new entity obtaining the relevant declaration or registration eligibility, with a check on whether the priority processing conditions are met; a new letter of authorisation alone does not mean the existing registration number has been transferred.

What actually affects continuity of market access is when the existing authorisation ends, when the new entity can lawfully take over, and whether stock can still be sold after the existing number is revoked. If these questions are left until after the two parties have ended their cooperation, supply may be interrupted even when the technical documentation is complete.

What is the difference between changing the registration holder and changing the product owner?

Vietnamese regulations distinguish between the product owner and the holder of the circulation number. The former supplies products under its own name or a brand under its control and bears responsibility for design, manufacture or intended use; the latter is the organisation that files the declaration of applicable standards or obtains the registration certificate. Where the brand owner is unchanged and only the Vietnamese holder changes from Company A to Company B, this does not in itself constitute a change of product owner. Confusing the two leads to citing the wrong basis for re-filing. (Source: Basis: Article 2(5), Article 21(2))

Likewise, changing the sales distributor does not necessarily change the holder. Manufacturers should first verify the entity shown in the public register rather than relying only on the heading of the distribution agreement. Where the existing holder remains unchanged, channel adjustments and the takeover of the registered entity should be assessed separately.

Article 25 allows eligible Vietnamese enterprises, cooperatives, household businesses and representative offices of foreign traders in Vietnam to file declarations or registrations, with eligibility linked to product ownership or a valid authorisation. Warranty arrangements are also part of the eligibility; single-use devices and devices with documentary evidence that a warranty does not apply are exceptions, so a repair centre cannot be demanded for every product without distinction. (Source: Basis: Article 25)

Which changes can be handled by updating the dossier, and which require a new entity to re-file?

Updating the name or address of the same entity is different in nature from another entity taking over as holder. Article 28(4) and Article 32(7) respectively list the dossier update items during circulation for Class A/B and Class C/D devices, including changes to the holder’s name or address. The fact that the system allows a name change does not mean an independent Company B can simply be substituted for Company A. (Source: Basis: Article 28(4), Article 32(7))

For a genuine change of entity, the project should plan the new entity’s filing route separately for the Class A/B declaration of applicable standards and the Class C/D registration, and prepare its authorisation and eligibility documents. The regulations expressly require a new declaration or a new number where the product owner changes, but that is a different category of change; that provision alone cannot be used to assert that every change of local holder follows the same rule. Where a merger, demerger or legal succession is involved, evidence of entity continuity should be submitted to the competent authority for verification rather than being classified as an ordinary rename. (Source: Basis: Articles 25–30)

This distinction also determines the workload of dossier preparation. Technical documents may be reusable, but the new entity’s authorisation, warranty responsibilities, labelling and public register information must still be matched item by item. Approval of the original application does not mean the old dossier can be copied without verification.

Can a change of registering entity qualify for priority processing?

One provision that is easily overlooked is Article 32a(1)(đ): where the product category and product code stated in a valid import licence, registration number approval decision or registration certificate remain unchanged, a change of importing entity or registering entity is a case in which priority processing of the registration dossier may be requested. It provides a clear lead for specific takeover projects, but it is not an automatic transfer and does not waive the documents required for the new application. (Source: Basis: Article 32a(1)(đ))

The applicant must submit a priority processing request, providing the reference number of the registration dossier already submitted and the corresponding evidence. The 10 working days in the provision is the period for the competent authority to consider whether priority processing is permitted, not a guarantee that the certificate will be issued within 10 days. Commercial scheduling should therefore account separately for dossier preparation, acceptance and supplementation, priority processing eligibility and the final registration outcome. (Source: Basis: Article 32a(2))

From a project management perspective, since this eligibility depends on the existing licence remaining valid, proactively revoking the existing number before the takeover route is clarified may weaken the basis for invoking this condition. Whether to terminate the existing authorisation, and when to apply for revocation, should be decided in light of actual eligibility and the competent authority’s views; “cancel first, re-file later” should not be set as a fixed step.

What happens to the existing registration number and stock after the original authorisation ends?

Article 38(4) provides that where the holder ceases operations, or is no longer authorised by the product owner and no replacement organisation exists, the circulation number falls within the revocation cases, subject to the exception in Article 37. The “replacement organisation” here cannot be read to mean that Company B automatically inherits Company A’s number by signing a new authorisation. The actual revocation must still follow the administrative procedure in Article 39. (Source: Basis: Article 38(4), Article 39)

Handling of stock after revocation is especially critical. Article 39a distinguishes between devices already sold to healthcare facilities or users and devices not yet sold to those end points. The former may in principle continue to be used until statutory disposal or product expiry, except for defective products that cannot be repaired and endanger health; the latter must cease circulation and be subject to recall measures. Goods imported into a warehouse, or invoiced to a downstream distributor, should not be treated as equivalent to having been sold to the end user. (Source: Basis: Article 39a)

“Stocking up a little more before revocation” therefore does not necessarily solve a supply gap and may instead increase unsold stock and disposal costs. Stock counts should be carried out by batch, shelf life, actual location and end-user delivery status before deciding on order and logistics arrangements.

Can the 24-month continued circulation arrangement be used for an ordinary change of holder?

No. Article 37 addresses specific situations such as the product owner ceasing production, going bankrupt or being dissolved, and the circulation number holder going bankrupt or being dissolved. The continued circulation arrangement of up to 24 months comes with after-sales commitments and approval conditions and is not a general grace period for changing agents. (Source: Basis: Article 37(1)–(5))

Taking the bankruptcy or dissolution of the holder as an example, a distribution organisation must commit to assuming warranty, maintenance and replacement or consumable supply responsibilities for up to eight years. The commitment dossier must be submitted no later than 60 days after the relevant event, and the Ministry of Health decides in writing whether continued circulation is permitted. Discontinuation, bankruptcy or dissolution of the product owner falls under a different paragraph with its own conditions and cannot be applied directly; an ordinary termination of commercial cooperation certainly cannot be brought within the exception by means of an after-sales commitment.

How do you turn the regulatory handover into an executable supply plan?

We recommend working backwards item by item from the product list rather than covering all models with a single termination letter. First confirm the classification, existing number, authorisation and dossier gaps for each model, then decide the last order, last import and customer delivery arrangements according to the progress of the new application. A contract can set out handover obligations, but it cannot replace an administrative licence.

Handover documentation should also go beyond registration files. Complaints, repairs, device serial numbers and batch distribution determine whether devices in use can be located later. The old holder and the new entity should each retain the necessary records, with clear allocation of who remains responsible for open complaints, corrective actions and spare parts service. Article 33 requires the holder to establish market traceability and keep after-sales management records, and this ongoing responsibility does not simply disappear when the commercial relationship ends. (Source: Basis: Article 33)

Hypothetical case: A manufacturer plans to move the holder of a Class C device from Company A to Company B, with the category and code unchanged and Company A’s registration certificate still valid. The project first checks the priority conditions under Article 32a and prepares Company B’s application, rather than immediately asking Company A to cancel. If Company A’s warehouse still holds devices not yet sold to hospitals, both parties must also assess stock handling together with the timing of revocation. Even once the new application has been submitted, the filing receipt cannot substitute for the market eligibility Company B needs; if the existing number is subsequently revoked, the stock rules of Article 39a must still be applied separately. This case shows that registration, authorisation and stock should be decided together.

Where a Vietnamese holding entity independent of the distributor is needed, see MediPass’s Vietnam local holder and transfer takeover services.

Frequently asked questions

If only the company name changes, is re-registration required?
Not necessarily. A dossier update mechanism exists for a name change of the same entity, but entity continuity must be demonstrable; a takeover by another company cannot be packaged as a rename.

Once a new holder has been appointed, can the original holder stop after-sales work immediately?
This is not advisable. The handover of traceability records, open complaints and repair responsibilities should be completed first to avoid a gap in which patients or hospitals cannot obtain support.

Is there a fixed completion time for a change of holder in Vietnam?
No uniform commitment can be given. The Class A/B and Class C/D routes differ, and dossier supplementation and priority processing eligibility also affect progress; the period for considering priority eligibility is not the same as the period for issuing the certificate.

Official References

  1. Vietnam Ministry of Health consolidated text 08/VBHN-BYT, 6 March 2026: consolidates Decree 98/2021 with the amendments in 07/2023, 96/2023, 85/2024, 04/2025 and 342/2025; the consolidated text is a tool for reading the current provisions and does not create a separate transfer regime.
  2. Official PDF of the consolidated text: Article 2(5) product owner definition (PDF page 4); Article 21(2) holder definition (page 20); Article 25 holder eligibility and warranty conditions (pages 23–24); Articles 26–28 Class A/B declaration documents, procedure and updates (pages 24–28); Article 29(1)(b) cases requiring a new Class C/D application (page 29); Article 32(7) dossier updates (page 40); Article 32a(1)(đ) and (2) priority processing eligibility and application procedure (pages 41–42); Article 33 traceability records (pages 42–44); Article 37 special continued circulation (pages 49–51); Articles 38(4) and 39 revocation cases and procedure (pages 51–53); Article 39a handling of products after revocation (pages 53–54).
  3. Vietnam National Public Service Portal registration procedure 1.003925: cross-check of registration application, priority processing request and supporting document requirements. The applicable application category must still be selected for each specific product.

This article is for general compliance preparation. The applicable route, documents and timelines should be confirmed against the product, its registration status and the authority’s case-specific requirements.

Leave a Comment

Your email address will not be published. Required fields are marked *

Chat on WhatsAppWhatsApp 咨询